Jenn Air Grill Parts for Jenn Air Grills from Grill Parts Distributors, the Gas Grill Parts Specialist for Gas Grills.

Covid-19. We are Open and Shipping and Processing Orders.

Jenn Air Grills
Gas Grill Parts from BBQParts.com

The "Jenn Air" gas grill is a particular brand of gas grill that has been sold in big box stores for almost 30 years.

Below we list the parts we stock and sell for Jenn Air. We don't have all the parts in all categories. So choose carefully. We provide a listing of the parts we stock and sell below.

We also offer a drop down menu of model numbers that show the parts we have for particular models. And, if you have a part number, you look up the part number on our home page, using the grill part number look up to see if we sell it.

As an added, look-up convenience, we have prepared a "drop down" list of Jenn Air model numbers that we know and listed the burners and heat plates that each model uses. You can select your model from the drop down list that immediately follows this paragraph.

Jenn Air Model Look Up:

One Low Shipping Charge Per Order - Only $9.89 Per Order

For Jenn Air gas grills we only stock and sell:

For Jenn Air gas grills, we DO NOT stock or sell:

� Stainless Steel Cook Grids
� Burners

� Heat Plates

� Hoses
� Knobs

� Regulators
� Valves

Stainless Steel Rod Cook Grids for Select Jenn Aire Models

Parts

Description

Price

Stainless Steel ROD Cooking Grid for Dynasty Grills

P/N CG93SS

in-stock

Made in the USA. This newly available high-quality, 304 stainless steel cook grid is made of 3/8 thick, solid SS rod for Dynasty gas grills. This cook grid fits most Dynasty models but not all. Verify your measurements with what we sell. Also, you can use the model drop down list on this page for reference. Any questions, click here to email us. Each cook grid measures 19 7/8 inches by 8 1/2 inches. Sold individually. Please order the quantity you need.

$55.00
Each

Three Stainless Steel ROD Cooking Grids for Dynasty Grills [3 Grids]

P/N CG93SS-3pak

in-stock

Reduced Quantity Pricing. By ordering one three-pak here, you will receive three of the Stainless Steel Rod Cook Grids with special quantity pricing. Made in the USA. These newly available high-quality, 304 stainless steel cook grids are made of 3/8 thick, solid SS rod for Dynasty gas grills. This cook grid fits most Dynasty models but not all. Verify your measurements with what we sell. Also, you can use the model drop down list on this page for reference. Any questions, click here to email us. Each cook grid measures 19 7/8 inches by 8 1/2 inches.

$165.00
For 3 Grids

Replacement Stainless Steel Rod Cook Grid For Some Ducane Models

P/N CG96SS

1 piece: 19 1/4 by 10 3/8 inches

in-stock

Made in the USA. This one piece replacement cook grid is for certain Ducane stainless steel models made after the year 2000. Sold individually. More than one grid is required for each grill. This one piece grid is made of sturdy, solid, 5/16 diameter 304 grade stainless steel rod. Measures 19 and 1/4 inch front to back and 10 and 3/8 inches side to side. Please measure your grid before ordering to verify you are ordering correctly. By ordering here, you will receive one grid. (Three piece set is available, see below CG96SS-3 Pack) Also fits some Nexgrill models, measure carefully.

$53.25
Each

Replacement Stainless Steel Rod Cook Grid Set For Some Ducane Models

P/N CG96SS-3pak

in-stock

Made in the USA. Each of the individual cook grids measures 19-1/4 inches front to back and 10-3/8 inches side to side. By ordering this three pack, you will get coverage of total cooking surface of 19-1/4 inch by 31-1/8 inches. The grids are made of sturdy, solid, 5/16 diameter 304 grade stainless steel rod. Please measure your grid before ordering to verify you are ordering correctly. By ordering here, you will receive a set of three grids. Also fits some Nexgrill models, measure carefully.

$159.75
Set of 3

Burners for Select Jenn Aire Models

Parts

Description

Price

Stainless Steel Tube Burner [NGTB1]

P/N 10261

in-stock

Stainless Steel Tube Burner. 14 1/4 inches long by 1 inch diameter. (NGTB1)

$7.99
Each

Stainless Steel Tube Burner [CTB1]

P/N 10361

in-stock

This stainless steel tube burner is a replacement burner for a number of Jenn Air gas grill models. The burner is made of high quality, 304 stainless steel, and comes with a wire mesh screen installed at the opening to deter entry and obstruction by insects and spiders. Most of the grills take two to five individual burners. Please select the quantity of burners you wish to order. (MHPCTB1) Please use our Nexgrill drop down model list, together with the illustration and sizes, to select the correct burner for your grill. Most of these grills use three to five burners. If you wish to benefit from quantity pricing on the 10361 burner, see the order entries below for three-pak, four-pack and five-pak quantities.

$12.75
Each

Three-Pak of Stainless Steel Tube Burners [CTB1-3]

P/N 10361-3

Sold in Quantity of Three Per Order

in-stock

Reduced Quantity Pricing. By ordering one three-pak here, you will receive three of the Stainless Steel Tube Burners with special quantity pricing. The burner is made of high quality, 304 stainless steel, and comes with a wire mesh screen installed at the opening to deter entry and obstruction by insects and spiders. Shipping charge will be the same as ordering one burner. This burner is 16 13/16 inches long.

$26.97
Pack of 3

Five-Pak of Stainless Steel Tube Burners [CTB1-5]

P/N 10361-5

Sold in Quantity of Five Per Order

in-stock

Reduced Quantity Pricing. By ordering one five-pak here, you will receive five of the 10361 Stainless Steel Tube Burners with special quantity pricing. The burner is made of high quality, 304 stainless steel, and comes with a wire mesh screen installed at the opening to deter entry and obstruction by insects and spiders. Shipping charge is the same as ordering one burner. This burner is 16 13/16 inches long.

$44.95
Pack of 5

Stainless Steel Tube Burner [NGTB2]

P/N 10371

in-stock

While Supplies Last.
This stainless steel tube burner has been used in a few models. The burner is made of high quality, 304 stainless steel, and comes with a wire mesh screen installed at the opening to deter entry and obstruction by insects and spiders. It is very similar to the 10361 burner we sell, but it is longer. The 10371 burner is 19 inches long. This burner is one inch in diameter. It has been used primarily in models 720-0133LP and 720-0133NG. Use the list of models below, together with the illustration and length (19 inches long) to select your burner correctly. Most of the grills take 3 to 5 burners. Please select the quantity of burners you wish to order. (10371/BBQNG33/NGTB2)

$7.99
Each

Single Steel Curved Tube Burner [NGB1]

P/N 10801

in-stock

While Supplies Last. Reduced Pricing. This unique, curved, stainless steel burner was used in imported gas grills, mostly the Nexgrill brand. Use our drop down list of Nexgriill models to verify the burner is correct for your grill. This aftermarket replacement for the OEM burner is sold on the web under the part numbers 10801 or NGB1. At the curved end of each burner is a welded threaded bolt. Each threaded bolt comes with a nut for mounting. Please choose carefully using brand and model number. Many imported grills of this era used similarly shaped, but slightly different burners. (NGB1).

$9.99
Each

Stainless Steel Tube BURNER [VTB1]

P/N 13001

in-stock

While Quantities Last.
Replacement stainless steel tube burner. Most grills take two to four individual burners. Please select the quantity of burners you wish to order. (VTB1)

$8.89
Each

Stainless Steel Burner [JATB1]

P/N 13361

in-stock

These stainless steel burner could be described as a 'tear-drop' shape. It has a mounting bracket that measures 4 3/8 by 5/8 inches welded to the top of the bend in the burner. (JATB1)

$27.49
Each

Stainless Steel Tube Burner [G431-0300-W2]

P/N 15491

Sorry, we do not stock or sell these burner.
This stainless steel tube burner measures 14 3/8 inches long. It is one inch in diameter. (CBP6, CBP4, 80009027, G431-0300-W2)

Stainless Steel Tube Burner [80013421]

P/N 15591

in-stock

While Supplies Last. This stainless steel tube burner measures 15 7/8 inches by one inch in diameter. It is used in a few Nexgrill gas grill models. Order the quantity you need. (15591, CBP2, 80005591, 80005703, 80006502, G505-1100-01, G504-0900-01, 80013421)

$7.99
Each

Tube Burner [80016864] [CBP3]

P/N 15641

in-stock

While Supplies Last.
This tube burner is used in a number of models. 16 15/16 inches long. Please select the quantity you wish to order. (80016864, 80005641, CBP3)

$7.99
Each

Stainless Steel Tube Burner [CBP10]

P/N 16781

Sorry, we do not stock or sell this burner.
This stainless steel tube burner measures 14 7/8 inches by one inch in diameter. It is used in a few Nexgrill gas grill models. (CBP10)

Cast Iron Burners [CIT] - 3 Pak

P/N 23301-3pak

in-stock

By ordering here, you will receive a three-pak of 23301 cast iron burners with special quantity pricing. These durable, high quality, cast iron burners have been used for years in grills sold under different brand names. The grills are usually made by Nexgrill and marketed under the brand names of Nexgrill, Jenn Air, Costco, Kirkland, Sunshine and Charbroil. There are other cast iron burners of similar size and shape, so please choose carefully. (CIT-3pak) We provide photos with measurements of burners 23301 and 26301 for comparison, Click here to view.

To help your selection, we also provide a model list for you to find the correct part number for your burner. Click here to go to our Nexgrill/BBQParts.com model list.

$69.00
for 3 Burners

Cast Iron Burners [CIT] - 4 Pak

P/N 23301-4pak

in-stock

By ordering here, you will receive a four-pak of 23301 cast iron burners with special quantity pricing. These durable, high quality, cast iron burners have been used for years in grills sold under different brand names. The grills are usually made by Nexgrill and marketed under the brand names of Nexgrill, Jenn Air, Costco, Kirkland, Sunshine and Charbroil. There are other cast iron burners of similar size and shape, so please choose carefully. (CIT-4pak) We provide photos with measurements of burners 23301 and 26301 for comparison, Click here to view.

To help your selection, we also provide a model list for you to find the correct part number for your burner. Click here to go to our Nexgrill/BBQParts.com model list.

$92.00
for 4 Burners

Cast Iron Burners [CIT] - 5 Pak

P/N 23301-5pak

in-stock

By ordering here, you will receive a five-pak of 23301 cast iron burners with special quantity pricing. These durable, high quality, cast iron burners have been used for years in grills sold under different brand names. The grills are usually made by Nexgrill and marketed under the brand names of Nexgrill, Jenn Air, Costco, Kirkland, Sunshine and Charbroil. There are other cast iron burners of similar size and shape, so please choose carefully. (CIT-5pak) We provide photos with measurements of burners 23301 and 26301 for comparison, Click here to view.

To help your selection, we also provide a model list for you to find the correct part number for your burner. Click here to go to our Nexgrill/BBQParts.com model list.

$115.00
for 5 Burners

Cast Iron Burners [CIJA] - 3 Pak

P/N 26301-3pak

in-stock

While Supplies Last. By ordering here, you will receive a three-pak of 26301 cast iron burners with special quantity pricing.
These cast iron burners are used in many gas grill models - primarily featured in Jenn-Air models. Each burner is 15 13/16 inches long and 2 3/16 inches wide. The burner design is distinguished by the angled top which is approximately 13 1/2 inches long. (CIJA-3pak)

The 23301 cast iron burner and the 26301 cast iron burner are very close in size and dimension. We find the main factor as to whether the burner fits or not is the position of the cast iron mounting stud on the underside of the burner. To help customers order the correct burner, we offer two aids. First, to see actual photos with measurements of the position of the stud, click here, and compare it with the burner in the grill. Secondly, if you know your model number, click here for our database on burner and heat plates used in many models. We list the models for which we have information.

$59.97
for 3 Burners

Cast Iron Burners [CIJA] - 4 Pak

P/N 26301-4pak

in-stock

While Supplies Last. By ordering here, you will receive a four-pak of 26301 cast iron burners with special quantity pricing.
These cast iron burners are used in many gas grill models - primarily featured in Jenn-Air models. Each burner is 15 13/16 inches long and 2 3/16 inches wide. The burner design is distinguished by the angled top which is approximately 13 1/2 inches long. (26301-4pak, CIJA-4pak)

$79.96
for 4 Burners

Cast Iron Burners [CIJA] - 5 Pak

P/N 26301-5pak

in-stock

While Supplies Last. By ordering here, you will receive a five-pak of 26301 cast iron burners with special quantity pricing.
These cast iron burners are used in many gas grill models - primarily featured in Jenn-Air models. Each burner is 15 13/16 inches long and 2 3/16 inches wide. The burner design is distinguished by the angled top which is approximately 13 1/2 inches long. (26301-5pak) (CIJA-5pak)

$99.95
for 5 Burners

DYNASTY
Cast Iron Burner [CIDYN]

P/N 28091

in-stock

This replacement cast iron burner assembly ships completely assembled - burner, Venturi, gasket and screws. Measures 7 1/2 inches by 17 3/4 inches. This quality cast iron burner is supplied as a replacement to the factory burner part number 70002056. (CIDYN)

$59.00
Each

Burner Support Rails

Sorry, we do not stock or sell burner support rails.

Burner Crossover Tubes

Sorry, we do not stock or sell burner crossover tubes.

One Low Shipping Charge Per Order - Only $9.89 Per Order

Below is a listing of 20 different heat plates that we stock and sell for Jenn Air models. Scroll down to review the heat plate information.

Parts

Description

Price

Stainless Steel Heat Plate [VCHP1]

P/N 90081

in-stock

Our remaining inventory of this heat plate has surface finish discoloration. Same quality and thickness. Please don't order if this will be bothersome.
Stainless Steel Heat Plate. 17 1/4 by 14 1/2 inches. Most grills take two to four individual heat plates. (VCHP1, 90081).

$7.99
Each

Porcelain Coated Steel Heat Plate

P/N 90681

Sorry, we do not stock or sell this heat plate. There is a stainless steel replacement listed below: 90681-SS.
This porcelain coated steel heat plate measures 15 inches by 4 5/8 inches. The heat plate is used by a number of different grill brands, including Charbroil,Sears/Kenmore, Tera Gear, and Nexgrill.

Stainless Steel Heat Plate [CBHP10]

P/N 90681-SS

Sorry, we do not stock or sell this heat plate. This stainless steel heat plate measures 15 inches by 4 5/8 inches. The heat plate is used by a number of different grill brands, including Charbroil, Sears/Kenmore, Tera Gear, and Nexgrill. (CBHP10)

Porcelain Steel Heat Plate

P/N 90691

Sorry, we do not stock or sell this part.
Porcelain coated steel heat plate.

Stainless steel Heat plate [NGSAMHP1]

P/N 90691-SS

Sorry, we do not stock or sell this part.
This stainless steel heat plate measures 4 7/8 inches by 15 1/4 inches. The heat plate is used in models 720-691A and 730-691A. Some websites sell a porcelain coated steel plate 90691 for these models. The heat plate we supply is made of stainless steel. Order the quantity you need. (NGSAMHP1)

Porcelain Steel Heat Plate

P/N 90821

in-stock

While Supplies Last. This porcelain steel heat plate measures 6 3/8 inches by 12 1/8 inches. It is used in Nexgrill model 720-812A. [n]

$7.99
Each

Porcelain Coated Steel Heat Plate

P/N 91191

We do not stock or sell this porcelain steel heat plate --- switching and now offering a high quality, exact fit stainless steel replacement at a reasonable price - offered below as P/N 91191-SS.

Stainless Steel Heat Plate [NGKHP1]

P/N 91191-SS

in-stock

While Supplies Last. This stainless steel heat plate is used some Nexgrill models. It measures 4 3/16 inches by 15 1/8 inches. It is sold in a porcelain steel version as part number 91191 on some other websites. (NGKHP1)

$7.99
Each

Stainless Steel Heat Plate [NGCHP2]

P/N 91231

in-stock

This stainless steel heat plate is used in a variety of models. Check the illustration and measurements, to verify you are selecting the correct heat plate for your grill. This 91231 heat plate measures 6 3/4 by 17 3/4 inches. Most grills take two to four heat plates. Please select the quantity of heat plates you wish to order. (NGCHP2)

$9.89
Each

Stainless Steel Heat Plates [NGCHP2] - 3 pak

P/N 91231-3pak

in-stock

Reduced Quantity Pricing. By ordering this three pack of 91231 heat plates, you will receive three 91231 stainless steel heat plates with special quantity pricing.
Three Stainless Steel Heat Plates. These stainless steel heat plates are used in a variety of models. Check the illustration and measurements, to verify you are selecting the correct heat plates for your grill. This 91231 heat plate measures 6 3/4 by 17 3/4 inches. (NGCHP2-3pak)

$27.00
Set of 3

Stainless Steel Heat Plates [NGCHP2] - 4 pak

P/N 91231-4pak

in-stock

Reduced Quantity Pricing. By ordering this four pack of 91231 heat plates, you will receive four 91231 stainless steel heat plates with special quantity pricing.
Four Stainless Steel Heat Plates. These stainless steel heat plates are used in a variety of models. Check the illustration and measurements, to verify you are selecting the correct heat plates for your grill. This 91231 heat plate measures 6 3/4 by 17 3/4 inches. (NGCHP2-4pak)

$36.00
Set of 4

Stainless Steel Heat Plates [NGCHP2] - 5 pak

P/N 91231-5pak

in-stock

Reduced Quantity Pricing. By ordering this five pack of 91231 heat plates, you will receive five 91231 stainless steel heat plates with special quantity pricing.
Five Stainless Steel Heat Plates. These stainless steel heat plates are used in a variety of models. Check the illustration and measurements, to verify you are selecting the correct heat plates for your grill. This 91231 heat plate measures 6 3/4 by 17 3/4 inches. (NGCHP2-5pak)

$45.00
Set of 5

Stainless Steel Heat Plate [NGCHP1]

P/N 91241

in-stock

This stainless steel heat plate is used in a variety of models. Most grills take two to four heat plates. Please select the quantity of heat plates you wish to order. (NGCHP1).

$9.89
Each

Stainless Steel Heat Plates [NGCHP1] - 3 pak

P/N 91241-3pak

in-stock

Reduced Quantity Pricing. By ordering this three pack of 91241 heat plates, you will receive three 91241 stainless steel heat plates with special quantity pricing.
Three Stainless Steel Heat Plates. These stainless steel heat plates are used in a variety of models. This 91241 heat plate measures 6 15/16 by 17 1/4 inches. (NGCHP1-3pak).

$27.00
Set of 3

Stainless Steel Heat Plates [NGCHP1] - 4 pak

P/N 91241-4pak

in-stock

Reduced Quantity Pricing. By ordering this four pack of 91241 heat plates, you will receive four 91241 stainless steel heat plates with special quantity pricing.
Four Stainless Steel Heat Plates. These stainless steel heat plates are used in a variety of models. This 91241 heat plate measures 6 15/16 by 17 1/4 inches. (NGCHP1-4pak).

$36.00
Set of 4

Stainless Steel Heat Plate [NGSHP2]

P/N 91271

in-stock

This stainless steel heat plate is used in a variety of models. Most grills take two to four heat plates. Please select the quantity of heat plates you wish to order. (NGSHP2)

$24.89
Each

Stainless Steel Heat Plate [NGSHP3]

P/N 91281

Sorry, we are out of this part until July 10. Please check back.
Made in the USA. This stainless steel heat plate is used in a number of models. It measures 8 1/4 inches wide by 17 5/16 inches front to back. Most grills take two to five heat plates. Please select the quantity of heat plates you wish to order. (NGSHP3/NGFT28/NG37/93228)

24.49

Stainless Steel Heat Plate [NGKIRHP2]

P/N 91331

in-stock

While Supplies Last.
This stainless steel heat plate is found mainly in one particular Nexgrill model: 720-0133. However, please use the Nexgrill model drop down list, together with the illustration and measurements (5 1/2 inches by 18 7/.8 inches) to verify you are ordering correctly. Most grills take two to five heat plates. Please select the quantity you wish to order. (NGKIRHP2)

$7.99
Each

Stainless Steel Heat Plate [NGCHP4]

P/N 92341

in-stock

Limited Quantity Available. While Supplies Last. This stainless steel heat plate is used in a number of models. Dimensions of the heat plate are 5 11/16 inches by 17 and 5/16 inches. Most grills take two to five heat plates. Please select the quantity you wish to order. (NGCHP4).

$7.99
Each

DYNASTY
Stainless Steel
Heat Plate [DYNHP1]

P/N 92551

in-stock

Made in the USA. We are happy to be able to supply this high quality, USA made heat plate at attractive pricing. Order with confidence. This replacement stainless steel heat plate measures 11 1/4 inches by 18 inches. It does not have a notch. This quality, stainless steel heat plate is supplied as a replacement to factory heat plate part number 9154200000. (DYNHP1)

$39.49
Each

DYNASTY
Stainless Steel
Heat Plate [DYNHP2]

P/N 92561

in-stock

Made in the USA. We are happy to be able to supply this high quality, USA made heat plate at attractive pricing. Order with confidence. This replacement stainless steel heat plate measures 11 1/4 inches by 18 WITH A NOTCHED OUT PORTION ON ONE EDGE. Please choose carefully. This quality, stainless steel heat plate is supplied as a replacement to factory heat plate part number 9102800000. (DYNHP2)

$39.49
Each

Stainless Steel Heat Plate [NGJAHP1]

P/N 92631

in-stock

While Quantities Last. Stainless steel heat plate. Measures 17 11/16 by 7 3/4 inches. Most models take three to five heat plates. Please order the quantity you need. (NGJAHP1)

$7.99
Each

Stainless Steel Heat Plate [NGCHP3]

P/N 93041

in-stock

While Supplies Last. This stainless steel heat plate is used in a number of models. The dimensions of the heat plate are 4 15/16 inches wide and 17 5/16 inches front to back. Most grills take two to four heat plates. Please select the quantity of heat plates you wish to order. (NGCHP3).

$9.89
Each

Stainless Steel Heat Plate [NGCHP3]

P/N 93041-SS

in-stock

$9.89
Each

Porcelain Steel Heat Plate

P/N 93051

in-stock

While Supplies Last. This heat plate is used in some Jenn Air models. It measures 4 15/16 by 17 1/4 inches. [f]

$7.99
Each

Stainless Steel Heat Plate [NGKHP2]

P/N 93051-SS

in-stock

While Supplies Last. This stainless heat plate is used in some Jenn Air models. It measures 4 15/16 by 17 1/4 inches. It is sold in a porcelain steel version as part number 93051 on some other websites. (NGKHP2)

$7.99
Each

Stainless Steel Heat Plate [NGKIRHP1]

P/N 94391

in-stock

Limited Quantities. While Supplies Last.
The stainless steel heat plate measures 5 1/8 inches by 15 3/8 inches. (NGKIRHP1)

$7.99
Each

Porcelain Steel Heat Plate

P/N 94591

We do not stock or sell this porcelain coated steel heat plate because we are able to offer an exact fit, stainless steel replacement heat plate in its place. It is offered below as P/N 94591-SS.

Stainless Steel Heat Plate [NGHP1]

P/N 94591-SS

in-stock

Limited Quantities. While Supplies Last.
On the web there are two heat plates offered for this grill, each made of two different materials. 94591 is made of porcelain coated steel. 94591-SS, is made of stainless steel. Both are the same size: 4 1/4 inches by 13 13/16 inches. By ordering from us, you will receive a stainless steel heat plate. (NGHP1)

$7.99
Each

Porcelain Steel Heat Plate

P/N 96791

Sub to Stainless Steel Heat Plate P?N 96791-SS

We have discontinue selling this porcelain costed steel heat plate in favor of high quality, exact-fit, stainless steel replacement heat plate at a very reasonable price. This is offered below as P/N 96791-SS.
We stock and sell a stainless steel version of this heat plate, as part number P/N 96791-SS. Scroll down down to find it.

Stainless steel Heat plate [NGKHP3]

P/N 96791-SS

in-stock

While Supplies Last
This stainless steel heat plate for Jenn Air models measures 5 1/2 inches by 15 1/8 inches. A porcelain coated steel version of this heat plate is sold as P/N 96791. Please order the quantity you need. (NGKHP3)

$13.49
Each

Stainless Steel Heat Plate

P/N BBQNG336

in-stock

While Supplies Last. This stainless steel heat plate is used in a number of Jenn Air models. The dimensions of this heat plate are 6 inches wide and 17 3/4 inches front to back. Please use the model list, together with the illustration and dimensions to verify this is the heat plate for your grill. Most grills take 2 to 5 heat plates.(BBQNG336).

$7.99
Each

Stainless Steel Heat Plate

P/N BBQNG89

in-stock

While Supplies Last. This stainless steel heat plate is used in a number of Jenn Air models. It measures 4 1/4 inches wide and 13 1/2 inches front to back. Please use the list of models below, together the dimensions, to verify this heat plate is correct for your grill. Most grills take two to five heat plates. Please select the quantity of heat plates you wish to order. (BBQNG89)

$7.99
Each

DYNASTY
Stainless Steel
Heat Plate [92551]

P/N DYNHP1

in-stock

$39.49
Each

DYNASTY
Stainless Steel
Heat Plate

P/N DYNHP2

in-stock

Made in the USA. We are happy to be able to supply this high quality, USA made heat plate at attractive pricing. Order with confidence. This replacement stainless steel heat plate measures 11 1/4 inches by 18 WITH A NOTCHED OUT PORTION ON ONE EDGE. Please choose carefully. This quality, stainless steel heat plate is supplied as a replacement to factory heat plate part number 9102800000. (DYNHP2)

$39.49
Each

Hose and Regulators

Sorry, we do not stock or sell any regulators, or hoses, or hose and regulator assemblies.