Sunbeam Factory Replacement Burners
Sunbeam Gas Grill Parts from Grill Parts Distributors

Click Here to Go to Sunbeam Rock Grate Listing  -  Click Here to Go to Sunbeam Cook Grid Listing
Click Here to Go to Sunbeam Heat Tent Listing - Click Here to Order by Part # or Model #


Below we offer the most popular Sunbeam Factory Burners by secured shopping cart ordering.  Because we sell the factory burners, customers can often reuse their old venturis on the factory burners we provide.  If you need venturis, we can ship the burner assembly with venturis if you provide your Sunbeam grill model number or the venturi parts number from the owner's manual.  Sorry, we cannot provide venturis by description.
 

Part Description Price

Sunbeam T-Shaped Burners have been popular in both Coleman and Sunbeam grills in recent years. Please use the dimensions listed below to verify the size of your burner and make the correction selection.

T Burner
21 1/2 inch
14410210
in-stock
Sunbeam Gas Grill 21 1/2 inch T Burner. Stainless Steel.  Measures 21 1/2 inches from side to side. Includes Venturis, Spark Collector Box and Electrode. Part Number 14410210. (14410210T, 14410194ST, 14410210SS, 14410210S, 15902, 14410190) (SBT21)

$32.95

Aluminized Steel, Small Dual Bar Burner (14.6 inch long) - Takes Two "Twist-In" Locking Venturis:
Burner
(no venturis)
3533-0100
in-stock
Factory Bar Burner. Takes two venturis. If your original "twist-in" venturis are still good, you can use this burner with your venturis for the most economical replacement. Does not include the two "twist-in" venturis or the igniter parts. This burner comes with 2 wing nuts that screw onto the two burner mounting studs. Burner dimensions: 14.6 inches X 4 inches.


14.6 x 4 inches

$19.95
(no venturis)

Burner
Assembly
with venturis
3533-0100
in-stock
Factory Bar Burner, shipped with Collector Plate, Electrode and Wire, Thumb Screws, Tie Downs and Two "twist-in" venturis.  Burner Dimensions: 14.6 X 4 inches.


14.6 x 4 inches


14.6 x 4 inches

- - - - - - - - - - - - - - - - - - - - - - - -

To provide the burner assembly with venturis, we need the venturi part number.  Sunbeam venturi part numbers are normally an 8 digit number.  Put the venturi part number in the box to the right.

$24.95

To order with venturis,
Enter your Venturi Part#


Burner
Assembly
with venturis
3533-0114
in-stock
In the last few years, Sunbeam is also using 3533-0114 in their grills. It is very similar to the above 3533-0100 bar burner with 3542-0110 twist-in venturis.  We urge you to select this burner by your manual's part number or model number - do not select it by size or photo.  The burner is shipped with the venturis welded in by the factory.  They do not twist in or out.  We also include the collector plate, electrode and wire, thumb screws and tie downs as pictured.  As an exact substitute, we are shipping in its place the 3533-0100 burner with 3542-0110 venturis and igniter hardware. Burner dimensions; venturi length and curvature are exactly the same. The only difference is the 114 burner had the venturis welded in and the 110 venturis twist in.


14.6 x 4 inches

$24.95

Aluminized Steel, Large Dual Bar Burner (19 inches long) - Takes Two "Twist-In" Locking Venturis:

Burner
(no venturis)
3533-0101
in-stock
Factory Bar Burner. Takes two venturis. If your original "twist-in" venturis are still good, you can use this burner with your venturis for the most economical replacement. Does not include the two "twist-in" venturis or the igniter parts. This burner comes with 2 wing nuts that screw onto the two burner mounting studs. Burner dimensions: 19 X 4 inches.


19 x 4 inches

$20.95
(no venturis)

Burner
Assembly
with venturis
3533-0101
in-stock
Factory Bar Burner, shipped with Collector Plate, Electrode and Wire, Thumb Screws, Tie Downs and Two "twist-in" venturis.

19 x 4 inches


19 x 4 inches

- - - - - - - - - - - - - - - - - - - - - - - -

To provide the burner assembly with venturis, we need the venturi part number.  Sunbeam venturi part numbers are normally an 8 digit number.  Put the venturi part number in the box to the right.

$28.95

To order with venturis,
Enter your Venturi Part#


Aluminized Steel, Small Single Bar Burner (14.6 inches long) - Takes ONE "Twist-In" Locking Venturi:

Burner
3533-0103
(no venturis)
in-stock
Factory Bar Burner. Takes only one venturi. If your original "twist-in" venturi is still good, you can use this burner with your venturi for the most economical replacement. Does not include the venturi or igniter parts. This burner comes with 2 wing nuts that screw onto the two burner mounting studs. Burner dimensions: 14.6 X 4 inches.


14.6 x 4 inches

$19.95
(no venturi)

Burner
Assembly
with venturi
3533-0103
in-stock

Factory Bar Burner, shipped with Collector Plate, Electrode and Wire, Thumb Screws, Tie Downs and One "twist-in" venturi. Burner Dimensions: 14.6 x 4 inches.


14.6 x 4 inches


14.6 x 4 inches

- - - - - - - - - - - - - - - - - - - - - - - -

To provide the burner assembly with venturis, we need the venturi part number.  Sunbeam venturi part numbers are normally an 8 digit number.  Put the venturi part number in the box to the right.

$24.95

To order with venturis,
Enter your Venturi Part#


Burner
Assembly
with venturis
3533-0115
in-stock

Sunbeam used to offer a single venturi burner, part number 35330115, that had the single venturi spot-welded into place - the burner was actually the 3533-0103 burner shown above with a twist-in 3542-0110 venturi with small spot welds in two places. The burner built in this style has been discontinued and is no longer available. When ordering the 3553-0115 now, you will receive the 3533-0103 burner with the 3542-0110 twist in venturi. The burner will be assembled and also comes with the electrode collector plate, electrode and wire, thumb screws that hold the collector plate in plate, and wing nuts for each of the two studs to hold the burner in position in the grill. Burner dimensions: 14.6 inches by 4 inches.


14.6 x 4 inches

$24.95

Large Porcelain Coated Bar Burner (19 inches long) - Uses Dual Venturi Assembly on a Single Mounting Plate Connected to Burner with Four Screws and Gasket:

Burner
(no venturi
assembly)

0446-0100
We are sold out of this burner and cannot supply. And, sorry, we have no substitutes to offer,
Factory Porcelain Dual Bar Burner is shipped with gasket and 4 screws. No venturi assembly nor any igniter parts are included or available. Stock 04460100. The burner, gasket, and screws we ship are factory duplicates. If your dual venturi assembly is in safe and usable condition, you can use it with this burner, gasket, and screws.


19 x 4 inches

Burner
0446-0100
No Longer
Available
Burner
Assembly
with venturi
assembly
0446-0100
No Longer
Available

The Factory Porcelain Dual Burner is no longer available as an assembly with dual venturis on a mounting plate. Sunbeam discontinued the dual venturis some time ago and we are now sold out. We cannot supply and we have no substitutes. Nor do we have any igniter parts for this burner - no electrode, no wire, no push button.

We do, however, stock and sell the dual porcelain burner with gasket and screws. If your dual venturi assembly is still in safe and useable condition, you can purchase burner part 04460100 with gasket and screws and transfer your venturi assembly to it. Make sure your old dual venturi plate assembly fits tight with the gasket positioned between the burner and venturi plate. Assemble it tightly so there are no leaks.

Burner
Assembly
with venturi
assembly
0446-0100
No Longer
Available

Flat, Rectangular-Shaped, Porcelain Coated Burner Distinctive by Rib-Like, Center Rods that Serve as the Rock Grate.   Two Venturis Molded into the Burner.

Spectrum
Burner
Assembly
3536010173

Sunbeam has discontinued this burner and we are now out. We made many efforts to locate more burners but have been unsuccessful. Sorry, we can no longer supply this Spectrum burner.

No Longer
Available
 
"Older" Screw & Gasket Venturi Style Sunbeam Burners
Part Description Price
Burner
(no venturis)
00403103
(40-3103)
Sorry, we sold out of this burner and cannot supply.
Burner. Dual H Burner, 17 3/4 inches wide, comes with gaskets, screws, and 2 J-hooks and wing nuts for securing burner to grill casting. Burner only does not include venturi tubes. (DCS-30)


17.75 x 7 inches

$29.95
(no venturis)

 

Burner
Assembly
with venturis
00403103
(40-3103)
Sorry, we sold out of this burner and cannot supply.
Burner Assembly. Dual H burner comes with gaskets, screws, two venturi tubes and 2 J-hooks and wing nuts for securing burner to grill casting. Burner is 17 3/4 inches wide. (DCS-30)


17.75 x 7 inches

- - - - - - - - - - - - - - - - - - - - - - - -

To provide the burner assembly with venturis, we need the venturi part number.  Sunbeam venturi part numbers are normally an 8 digit number.  Put the venturi part number in the box to the right.

$36.95

To order with venturis,
Enter your Venturi Part#


 

Burner
(no venturis)
00403161
(40-3161)
in-stock
Dual H Burner 21 7/8 inches wide, comes with gaskets, screws, and 2 J-hooks and wing nuts for securing burner to grill casting. Burner only does not include venturi tubes.


21 7/8 x 7 inches

$35.95
(no venturis)

Burner
Assembly
with venturis
00403161
(40-3161)
in-stock
Dual H Burner comes with gaskets, screws, and two venturi tubes and 2 J-hooks and wing nuts for securing burner to grill casting.


21 7/8 x 7 inches

- - - - - - - - - - - - - - - - - - - - - - - -

To provide the burner assembly with venturis, we need the venturi part number.  Sunbeam venturi part numbers are normally an 8 digit number.  Put the venturi part number in the box to the right.

$42.95

To order with venturis,
Enter your Venturi Part#


Burner
(no venturis)
00402015
(40-2015)
in-stock
Burner. Oval Burner comes with gaskets, screws, and 2 J-hooks and wing nuts for securing burner to grill casting. Burner only does not include venturi tubes.


15.25 x 4 inches

$21.95
(no venturis)

Burner
Assembly
with venturis
00402015
(40-2015)
in-stock
Burner Assembly. Oval burner comes with gaskets, screws, two venturi tubes and 2 J-hooks and wing nuts for securing burner to grill casting. Burner is 15.25 x 4 inches.


15.25 x 4 inches

- - - - - - - - - - - - - - - - - - - - - - - -

To provide the burner assembly with venturis, we need the venturi part number.  Sunbeam venturi part numbers are normally an 8 digit number.  Put the venturi part number in the box to the right.

$28.95

To order with venturis,
Enter your Venturi Part#


Burner
(no venturis)
00402950
(40-2950)
Sorry, we are sold out of this burner and have no more supply. We do not know of any substitutes that can be used in its place.
Single Oval 15 1/4 with gasket and screws and no venturi.


15.25 x 4 inches

 
Burner
Assembly
with venturi
00402950
(40-2950)
Sorry, we are sold out of this burner and have no more supply. We do not know of any substitutes that can be used in its place.
Single Oval Burner with Venturi, gasket, and screws.


15.25 x 4 inches

- - - - - - - - - - - - - - - - - - - - - - - -

To provide the burner assembly with venturis, we need the venturi part number.  Sunbeam venturi part numbers are normally an 8 digit number.  Put the venturi part number in the box to the right.
 
Burner
(no venturis)
35330102
(3533-0102)
in-stock
Dual Oval Burner Takes 2 Venturis that curve to the front. This choice does not include venturis - Burner is shipped with bracket, gaskets, screws, and J-hooks and wing nuts. No venturis.


14.5 x 4 inches

$21.95
(no venturis)

Burner
Assembly
with venturis
35330102
(3533-0102)
in-stock
Dual Oval Burner Assembly comes with burner, bracket, gaskets, screws, two venturis, and J-hooks and wing nuts to hold burner to bottom grill casting.


14.5 x 4 inches

- - - - - - - - - - - - - - - - - - - - - - - -

To provide the burner assembly with venturis, we need the venturi part number.  Sunbeam venturi part numbers are normally an 8 digit number.  Put the venturi part number in the box to the right.  

$28.95

To order with venturis,
Enter your Venturi Part#


Burner
(no venturis)
00404145
(40-4145)
Sunbeam no longer has this burner and we sold out. We have no substitute burner to provide. Sorry.

H Burner 15 1/2 Alum. Comes with burner bracket, gaskets and screws. No Venturis. (MCM-14502/MHP-DSB)


15.5 x 7.5 inches

$21.95
(no venturis)

 
Burner
Assembly
with venturis
00404145
(40-4145)
Sunbeam no longer has this burner and we sold out. We have no substitute burner to provide. Sorry.

H Burner 15 1/2 Alum. Comes with burner bracket, gaskets and screws and venturis. (MCM-14502/MHP-DSB)


15.5 x 7.5 inches

- - - - - - - - - - - - - - - - - - - - - - - -

To provide the burner assembly with venturis, we need the venturi part number.  Sunbeam venturi part numbers are normally an 8 digit number.  Put the venturi part number in the box to the right.

$28.95

 

Burner
(no venturis)
00404146
(40-4146)
Sorry, we are sold out and cannot supply. Sunbeam has discontinued this burner, We have no substitutes.
H-Burner 17 3/4 Alum. Comes with gaskets, screws, and burner bracket. No Venturis.


17.75 x 7.5 inches

$21.95
(no venturis)

 

Burner
Assembly
with venturis
00404146
(40-4146)
Sorry, we are sold out and cannot supply. Sunbeam has discontinued this burner, We have no substitutes.
H-Burner 17 3/4 Alum. Comes with gaskets, screws, and burner bracket and venturis.


17.75 x 7.5 inches

- - - - - - - - - - - - - - - - - - - - - - - -

To provide the burner assembly with venturis, we need the venturi part number.  Sunbeam venturi part numbers are normally an 8 digit number.  Put the venturi part number in the box to the right.

$28.95
 

 

Lava Rock
7 lb. Bag
in-stock
Lava Rock.  We offer a 7 lb. bag of high quality lava rock to use on top of wire rod rock grate.  One bag is enough to cover the rock grate in one cooking compartment.  The 7 lb. bag covers 400 square inches of rock grate surface.  We have just one shipping charge per order so you can add a bag of lava rock for no additional shipping charge.
$7.99

Briquettes BRICS 70
in-stock


60 Pieces

Our package of 70, square, pyramid-shaped top ceramic briquettes, manufacturers especially for gas grill use, have been popular for over 20 years. The individual briquettes are approximately 2 inches square, flat on the bottom, and have a four-sided pyramid shape on the top to absorb and burn up the grease. By ordering of one here, you will receive one bag of 70 briquettes.

$21.00
Quantity:
Bag of 70 Briquettes
 

  

 

Thermos Grill Parts for Thermos Grills from Grill Parts Distributors, the Gas Grill Parts Specialist for Gas Grills.
Grill Parts Specialists for Charbroil, Sunbeam, Thermos, Charmglow, Weber, Ducane and Broilmaster Parts.

Answers and Click Throughs to Frequently Asked Questions

What We Sell:  We sell the popular replacement parts for the brands of gas grills listed on our website. All the parts we sell are shown or listed on our website. We have no other parts to add to orders and no other parts available for sale. We offer shopping cart ordering - either by model number, by part number, or by descriptive, illustrated list of parts.  We reserve the right to limit quantities ordered.
How To Order:  All orders are placed through our website: bbqparts.com. Please use our online brand shopping carts for efficient order processing.
How To Contact Us:  Sorry, we do not offer phone service.  We find we can offer better and more informed customer service by responding to email questions and queries.  Click here to go to our customer inquiry form.  If you need to report damaged or missing parts, please click here for that report form.  Thank you.
How To Pay: Orders can be charged to Visa, MasterCard, or Discover. Sorry, we do not accept American Express, money orders, or checks.
Where We Ship: We only ship to 48 of the United States, the states sometimes referred to as the "lower 48." All orders are shipped via United Parcel Service ground service.
How We Ship:  We ship orders from our in-stock inventory, usually within two business days of receipt of order via United Parcel Service (UPS) ground service from St. Petersburg, Florida. We have one low shipping charge per order - only $6.95 per order.   Sorry, we do not offer any expedited shipping service.
Where We Are:  Our shipping and warehouse location is in St. Petersburg, Fl.  All parts orders are shipped from St. Petersburg, Fl.  We do not have a retail store and do not offer customer pickup at our warehouse.
Shipment Inquiry
& Report Form
  Customer
Inquiry Form
  Shipping Areas
& Charges
  Returns
Policy
  Privacy
Policy
To Send Order Inquiry, Click Here: Orders@bbqparts.com
 
Back to the Sunbeam Page
Back to the Home Page
 

Copyright 1997- 2014, BBQPARTS.com. All right reserved. Propane and natural gas are explosive and dangerous. We urge all consumers to be careful when using and repairing their gas grill. Do not use unsafe grills. Grills should be used according to manufacturer's specifications. The owner's manual often provides a good troubleshooting guide. If you have concerns about the repair of your gas grill, we urge you to contact a local gas appliance service company or the local gas company in your area. Also, grill manufacturers have customer service help lines to assist consumers.