Alfresco Gas Grill Parts
Gas Grill Parts from BBQParts.com

We stock and sell a replacement stainless steel gas grill burner and two stainless steel, replacement heat plates for selected Alfresco gas grill models.
All the parts we stock and sell for Alfresco gas grills are listed below.

Please order in the quantities you need.

 

One Low Shipping Charge Per Order - Only $9.89 Per Order

 
Alfresco Model Look-Up:
 
All the parts we stock and sell for Alfresco grills are listed below.
 
Alfresco
Parts
 Description
Price
Stainless Steel ALFU1 Burner with Mounting Bracket
P/N ALFU1-w/MB
in-stock
 In recent years, there had been two different styles of ALFU1 burners sold. By ordering this one, you will receive a high quality, stainless steel ALFU1 burner with stabilizing bracket - this is a center feed, U shaped tube burner designed with a bracket on the underside of the burner. The stabilizing bracket has a mounting stud on the underside and a cotter pin to hold it securely in place. (the other burner for the Alfresco grills did not have a bracket). See the photos in this listing. This burner has an air shutter and flame crossover tube. The burner dimensions are 18 1/4 inches long by approximately 7 1/4 inches wide It is 7 1/4 inches wide at the bracket and 7 1/8 inches wide at the crossover tubes. The distance from the end of the burner at the venturi to the mounting stud under the bracket is 14 7/8 inches. We encourage customers to remove their current Alfresco burner and confirm the match and the measurements. Order the quantity you need. $72.00
Each
Quantity:

Stainless Steel ROD Cooking Grid for Alfresco Grills
P/N CG103SS
 Sorry, we are temporarily out of stock of this part until May 20, 2024. Please check back.
Made in the USA. This heavy duty cook grid is made of 304 stainless steel rod that is 3/8 inches in diameter and designed and made specifically for Alfresco gas grills. Each cook grid measures 13 5/8 by 19 1/4 inches. Replaces Alfresco OEM Part 290-0033. Sold individually. More than one required. Please order the quantity you need. 		119.00
Stainless Steel ROD Cooking Grid for Alfresco Grills
P/N CG104SS
in-stock
 Made in the USA. This heavy duty cook grid is made of 304 stainless steel rod that is 3/8 inches in diameter and designed and made specifically for Alfresco gas grills. Each cook grid measures 19 1/4 by 12 inches. Replaces Alfresco OEM Part 290-0058. Sold individually. More than one required. Please order the quantity you need.
PLEASE NOTE: Outstanding freight rate savings over other web sites - pay only $9.89 per order! 		$110.00
Each
Quantity:

Stainless Steel ROD Cooking Grid for Alfresco Grills
P/N CG105SS
in-stock
 Made in the USA. This heavy duty cook grid is made of 304 stainless steel rod that is 3/8 inches in diameter and designed and made specifically for Alfresco gas grills. Each cook grid measures 18 3/4 by 12 3/4 inches. Replaces Alfresco OEM Part 290-0124. Sold individually. More than one required. Please order the quantity you need. $124.00
Each
Quantity:

Stainless Steel ROD Cooking Grid for Alfresco Grills
P/N CG106SS
in-stock
 Made in the USA. This heavy duty cook grid is made of 304 stainless steel rod that is 3/8 inches in diameter and designed and made specifically for Alfresco gas grills. Each cook grid measures 18 3/4 by 11 3/4 inches. Replaces Alfresco OEM Part 290-0157. Sold individually. More than one required, Please order the quantity you need. $110.00
Each
Quantity:

CG118SS Stainless Steel ROD Cooking Grid for Alfresco Grill [OEM P/N 290-0348]
P/N CG118SS
in-stock
 Made in USA. This high quality, heavy duty, stainless steel cooking grid is made specifically for Alfresco Grills (some models). Made of 3/8 inch diameter solid stainless steel. Measures 18 and 7/8 inches front to back by 10 and 3/8 inches wide. Please use our Alfresco model drop down to see if it used in your model. Sold and priced individually. One grill model may require multiple grids. Please order the quantity you need. $110.00
Each
Quantity:

Stainless Steel ALFRESCO Heat Plate
P/N ALFBT1
in-stock
 Made in the USA of high quality 20 gauge, 304 stainless steel. This replacement, stainless steel heat plate fits selected Alfresco gas grill models. This heat plate measures 17 3/16 inches front to back and 12 7/8 inches side to side. Please order the quantity you need. Does not include briquettes. $58.99
Each
Quantity:

Stainless Steel ALFRESCO Heat Plate
P/N ALFBT2
in-stock
 Made in the USA of high quality 20 gauge, 304 stainless steel. This replacement, stainless steel heat plate fits selected Alfresco gas grill models. The heat plate measures 17 7/8 inches front to back and 12 3/4 inches side to side, Please order the quantity you need. Does not include briquettes. $62.99
Each
Quantity:

Alfresco Stainless Steel Tray with Briquettes.
P/N ALFBT3
in-stock
 This stainless steel briquette tray with briquettes fits Alfresco ALXE 36 inch models. Heavy gauge 304 stainless construction. The tray measures 17 and 7/8 inches by 10 5/8 inches. Includes 18 ceramic pyramid briquettes. Ships fully assembled. $139.00
Each
Quantity:

Replacement Briquette Tray Assembly with Briquettes
P/N ALFBT4
in-stock
 This aftermarket exact fit replacement briquette tray assembly with briquettes is a quality replacement part 510-0522. The tray measures 17 7/8 inches by 12 3/8 inches. $189.00
Each
Quantity:

USA-MADE Square Ceramic Briquettes. 28 Briquettes per box.
P/N BBQLYX-USA
in-stock
 These high-quality, Made in the USA, briquettes are manufactured for us by the leading manufacturer/supplier to a number of high quality, American made brands of gas grills. They fit and work for heat plates in Lynx, Dynasty, and Alfresco gas grills. Can be used in other brands as well. They are a light brown, earth tone color (same as ones used in high end, USA grills) and the same size as the white replacement briquettes sold on the internet. The briquettes are well packaged, in individual boxes of 28 briquettes. They are NOT shipped in bags. The briquettes measure 2 inches square and are 3/4 inch tall. The four sides meet at a flat top - like a cut off pyramid. On the bottom, there is a round recess, approximately 1 inch in diameter, to capture and transfer heat better. We are able to offer these at very reasonable pricing because of our quantity buying. By ordering one box, you will receive one box of 28 briquettes. Order the box quantity you need. The number of briquettes you need depends on the size of the heat plate, and the number of heat plates in your grill. We suggest you count before ordering to get enough. (28 briquettes per box). Highly recommended. (not 41648)
PLEASE NOTE: Outstanding freight rate savings over other web sites - pay only $9.89 per order! 		$32.00
Box of 28 briquettes
Quantity:

IG51B - Aftermarket 'L' Shaped Electrode for Alfresco Grills (Replaces OEM Part 210-0189)
P/N IG51B
in-stock
 This aftermarket, high quality, heavy duty 'L' shaped, main burner electrode Replaces the Alfresco original part, 210-0189. This electrode is a 1-1/2 inches long white ceramic insulator with mounting bracket, flat male spade terminal end for the wire connection and a 90 degree bend electrode tip. This part is sold as electrode only. We also stock and sell the collector box/shield as our P/N IG50B. Order the quantity you need. (IG51B) $19.95
Each
Quantity:

IG50B - Collector Box/Shield for Alfresco Electrode
P/N IG50B
in-stock
 This high quality, stainless steel, aftermarket collector box/shield is designed to hold the electrode IG51B. (IG50B) $22.50
Each
Quantity:

IGEIB16B Two Spark Electronic Ignition Module. [OEM P/N 210-0195]
P/N IGEIB16B
in-stock
 This two spark electronic ignition module generates spark to light two separate burners. Powered with one AA BATTERY. Use our model drop down to see if your Alfresco model takes this part. $23.95
Each
Quantity:

Four Spark Electronic Ignition Module
P/N IGEIB17B
in-stock
 This four spark electronic ignition module fits a variety of Viking and Alfresco gas grill models. Comes with a mounting plate that measures 4 3/4 inches by 1 7/8 inches. The igniter module is powered by two 'AA' batteries. Batteries not included. Replaces Alfresco part number 2011-24. $24.50
Each
Quantity:

Universal Gas Grill Control Knob.
P/N 02342
in-stock
 Universal Knob. Selectable D Position, Socket Dia. (6mm Or 8mm), And Shaft Length (Flush, 0.25 Inch, Or 1.625”. Shatfs Can Also Be Trimmed To Desired Length). Includes Six Inserts (Shafts) And Set Screw. Fits Any Grill With Inside Bezel Dia. Greater Than 2.1875. $10.49
Each
Quantity:

Regulators, Hose and Regulators Assemblies, Or Valves.
 Sorry, we do not stock or sell regulators, or hose and regulators assemblies or valves for this grill brand.

 


Grill Parts Specialists for Charbroil, Sunbeam, Thermos, Charmglow, Weber, Ducane and Broilmaster Parts.
 

Answers and Click Throughs to Frequently Asked Questions
What We Sell:  We sell the popular replacement parts for the brands of gas grills listed on our website. All the parts we sell are shown or listed on our website. The parts carry a one year warranty.  We have no other parts to add to orders and no other parts available for sale. We offer shopping cart ordering - either by model number, by part number, or by descriptive, illustrated list of parts.  Because of our low prices, and low shipping charge per order, we reserve the right to limit quantities ordered.
How To Order:  All orders are placed through our website: bbqparts.com.  Please use our online brand shopping carts for efficient order processing.  To maintain accounting and shipping accuracy, we do not combine orders or change quantities or change parts ordered after the shopping cart is closed out.  If you need to change or cancel, let us know as soon as possible and we will do out best to catch the order before shipping.
How To Contact Us:  Sorry, we do not offer phone service.  We find we can offer better and more informed customer service by responding to email questions and queries.  Click here to go to our customer inquiry form.  If you need to report damaged or missing parts, please click here for that report form.  Thank you.
How To Pay: Orders can be charged to Visa, MasterCard, or Discover. Sorry, we do not accept American Express, money orders, or checks.  Sorry, we do not accept PayPal.
Where We Ship: We only ship to 48 of the United States, the states sometimes referred to as the "lower 48." All orders are shipped via United Parcel Service ground service.
How We Ship:  There is one low, flat rate shipping charge per order - $9.89 per order.  We only ship to the lower 48 United States and only via UPS ground service.  We need a street address for the shipping address.  No PO Boxes.  Sorry, we are unable to combine orders nor can we add to orders after the shopping cart is charged and closed out.  Sorry, we do not offer customer pick up or returns at our warehouse.  We usually ship within two business days of the receipt of order.
Where We Are:  Our shipping and warehouse location is in St. Petersburg, Fl.  All parts orders are shipped from St. Petersburg, Fl.  We do not have a retail store.   And, sorry, we do not offer customer pick up or returns at our warehouse.
Shipment Inquiry
& Report Form		   Customer
Inquiry Form		   Shipping and
Processing Times		   Returns
Policy 		  Privacy
Policy
To Send Order Inquiry, Click Here: Orders@bbqparts.com
 

Back to the Home Page

Copyright © 1997-2024, BBQPARTS.com. All right reserved. Propane and natural gas are explosive and dangerous. We urge all consumers to be careful when using and repairing their gas grill. Do not use unsafe grills. Grills should be used according to manufacturer's specifications. The owner's manual often provides a good troubleshooting guide. If you have concerns about the repair of your gas grill, we urge you to contact a local gas appliance service company or the local gas company in your area. Also, grill manufacturers have customer service help lines to assist consumers.